### Publication List

- C. M. Tan and T. N. Goh, “Theory and Practice of Quality and Reliability Engineering in Asia Industry”, Springer, 1st ed. 2017
- C. M. Tan and F. He. Electromigration Modeling at Circuit Layout Level. SpringerBrief on Reliability, 2013.
- C. M. Tan, W. Li, Z. Gan, and Y. Hou. Applications of finite element methods for reliability studies on ULSI Interconnections. UK: Springer Verlag, 2011.
- C. M. Tan. Electromigration in ULSI Interconnections. New York: World Scientific, 2010.
- C. M. Tan. Simulated Annealing. Vienna, Austria: IN-TECH Publishing, 2008.

- Harshit Pandey, Cher Ming Tan, “Quantitative Service Reliability Assessment on Single and Multi Layer Networks ”, Information, Communication and Computing Technology, Springer, 2018.
- C. M. Tan, “Component-Level Reliability: Physical Models and Testing Regulations,” Handbook of Advanced Lighting Technology; Springer, pp. 1-16, 2016.
- Tan Cher Ming and Hou Yuejin. “Changing Reliability Physics of Interconnect from Micro- to Nanotechnology”,
*Ceramic Integration and Joining Technologies: From Macro to Nanoscale,*John Wiley, 2010. - C. M. Tan. “Reliability Assessment of Integrated Circuits and its Misconception,” in
*Integrated Circuits, Photodiodes and Organic Field Effect Transistors*. New York, United States: Nova Scientific Publishing, 2009, pp. 45-68. - C. M. Tan and N. Raghavan. “Simulated Annealing for Mixture Distribution Analysis and its Applications to Reliability Testing” in
*Simulated Annealing*. Vienna, Austria: IN-TECH Publishing, 2008, pp.227-256.

#### JOURNAL PAPERS

- M. Chan, C. M. Tan, K. C. Lee, C. S. Tan, “Non-destructive degradation study of copper wire bond for its temperature cycling reliability evaluation, “
*Microelectronics Reliability*, Vol. 61, pp. 56-63, June, 2016. - Yizhen Tian*, Feifei He, Qi-Jun Zhang, Cher Ming Tan, Jianguo Ma, “Rapid ULSI Interconnect Reliability Analysis Using Neural Networks,”
*IEEE Trans. On Devices and Materials Reliability,*vol. 14, issue 1, pp. 400-407, March, 2014. - K. Ghosh*, J. Zhang, L. Zhang, Y. Dong, H. Li, C. M. Tan, G. Xia, and C. S. Tan, “Integration of Low-k Dielectric Liner in Through Silicon Via and Thermomechanical Stress Relief,” Applied
*Physics Express*, vol. 5(12), pp. 126601-3, December, 2012. - Y. D. Han*, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. Tan, and J. Wei, “Creep mitigation in Sn-Ag-Cu composite solder with Ni-coated carbon nanotubes,”
*Journal of Materials Science: Materials in Electronics*, vol. 23, no. 5, pp. 1108-1115, May, 2012. - Y. D. Han*, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. Tan, and J. Wei,
**“**Effect of Ni-Coated Carbon Nanotubes on Interfacial Reaction and Shear Strength of Sn-Ag-Cu Solder Joints,”*Journal of Electronic Materials*, vol. 41, no. 9, pp. 2478-86, September, 2012. - Y.D. Han*, H.Y. Jing, S.M.L. Nai, L.Y. Xu, C.M. Tan, J. Wei, “Interfacial reaction and shear strength of Ni-coated carbon nanotubes refinforced Sn-Ag-Cu solder joints during thermal cycling”,
*Intermetallics,*vol. 31, pp. 72-78, December 2012. - C. M. Tan*, W. Li, and Z. Gan., “Applications of Finite element Methods for Reliability Study of ULSI Interconnections,”
*Microelectronics Reliability*, vol. 52, no. 8, pp. 1539-1545, August, 2012. - Y. D. Han*, S. M. L. Nai, H. Y. Jing, L. Y. Xu, C. M. Tan, and J. Wei, “Development of a Sn-Ag-Cu solder reinforced with Ni-coated carbon nanotubes,”
*Journal of Materials Science: Materials in Electronics*, vol. 22, pp. 315-322, 2011. - Y. C. Tan, C. M. Tan, X. W. Zhang, T. C. Chai, and D. Q. Yu, “Electromigration performance of through silicon via (TSV) – A modeling approach,”
*Microelectronics Reliability*, vol. 50, no. 9, pp. 1336-1340, 2010. - Y. C. Tan, C. M. Tan, and T. C. Ng, “Addressing the challenges in solder resistance measurement for electromigration test,”
*Microelectronics Reliability*, vol. 50, pp. 1352-1354, 2010. - C. M. Fu, C. M. Tan, S. H. Wu, and H. B. Yao, “Width dependence of the effectiveness of reservoir length in improving electromigration for Cu/low-K interconnects,”
*Microelectronics Reliability*, vol. 50, pp. 1332-1335, 2010. - Y. D. Han, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. Tan, and J. Wei., 2010, “Indentation size effect on the creep behavior of a SnAgCu solder,”
*International Journal of Modern Physics B*, vol. 24, no. 1-2, pp. 267-275. - Y.D. Han*, H.Y. Jing, S.M.L. Nai, L.Y. Xu, C.M. Tan, J. Wei
**,**2010, February,**“**Temperature Dependence of Creep and Hardness of Sn-Ag-Cu Lead-Free Solder,”*Journal of Electronic Materials*, v 39, n 2, p 223-229. - S. Z. Y. Loo, P. C. Lee, Z. X. Lim, N. Yantara, T. Y. Tee, C. M. Tan, and Z. Chen., 2010, “Interface fracture toughness assessment of solder joints using double cantilever beam test,”
*International Journal of Modern Physics B*, vol. 24, no. 1-2, pp. 164-174. - Y. D. Han, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. Tan, and J. Wei, 2009, “Nanomechanical properties of a Sn-Ag-Cu solder reinforced with Ni-coated carbon nanotubes,”
*International Journal of Nanoscience*, vol. 9, no. 4, pp. 283-287. - Y. D. Han, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. Tan, J. Wei, L.Y. Xu, S.R. Zhang, 2009, ”A modified constitutive model for creep of Sn-3.5Ag-0.7Cu solder joints,”
*Journal of Physics D: Applied Physics*, v 42, n 12. - J. G. Ma, M. Yao, and C. M. Tan. “Review of electromigration modeling of IC Interconnects,”
*Journal of the University of Electronic Science and Technology of China*, vol. 38, no. 5, pp. 495-504, 2009. - A. Roy, Y. Hou, and C. M. Tan. “Electromigration in width transition copper interconnect,”
*Microelectronics Reliability*, vol. 49, pp. 1086-1089, 2009. - Y. Hou and C. M. Tan. “Comparison of stress-induced voiding phenomena in copper line-via structures with different dielectric materials,”
*Semiconductor Science and Technology*, vol. 24, pp. 85014-85022, 2009. - W. Li, C. M. Tan, and N. Raghavan. “Dynamic simulation of void nucleation during electromigration in narrow integrated circuit interconnects,”
*Journal of Applied Physics*, vol. 105, no. 1, pp. 014305, 2009. - C. M. Tan and N. Raghavan. “A bimodal 3-parameter lognormal mixture distribution for electromigration failures,”
*Thin Solid Films*, vol. 516, pp. 8804-8809, 2008. - A. Roy and C. M. Tan. “Very high current density package level electromigration test for copper interconnects,”
*Journal of Applied Physics*, vol. 103, no. 9, 2008. - Y. Hou and C. M. Tan. “Stress-induced voiding study in integrated circuit interconnects,”
*Semiconductor Science and Technology*, vol.23, 2008. - A. Roy and C. M. Tan. “Probing into the asymmetric nature of electromigration performance of submicron interconnect via structure,”
*Thin Solid Films*, vol. 515, no. 7-8, pp. 3867-3874, 2007. - W. Li, C. M. Tan, and Y. Hou. “Dynamic simulation of electromigration in polycrystalline interconnect thin film using combined Monte Carlo algorithm and finite element modeling,”
*Journal of Applied Physics*, vol. 101, no. 10, pp. 104314, 2007. - W. Li and C. M. Tan. “Enhanced Finite Element Modelling of Cu Electromigration using ANSYS and Matlab,”
*Microelectronics Reliability*, vol. 47, no. 9-11, pp. 1497-1501, 2007. - C. M. Tan and Y. Hou. “Lifetime modeling for stress-induced voiding in integrated circuit interconnections,”
*Applied Physics Letters*, vol. 91, no. 6, pp. 061904, 2007. - C. M. Tan, N. Raghavan, and A. Roy. “Application of Gamma Distribution in Electromigration for Submicron Interconnects,”
*Journal of Applied Physics*, vol. 102, no. 10, pp. 103703, 2007. - C. M. Tan and A. Roy. “Electromigration in ULSI Interconnects,”
*Materials Science & Engineering R- Reports*, vol. 58, no. 1-2, pp. 1-75, 2007. - C. M. Tan and Y. Hou. “Revisit to the finite element modeling of electromigration for narrow interconnects,”
*Journal of Applied Physics*, vol. 102, no. 3, pp. 33705, 2007. - C. M. Tan and A. Roy. “Investigation of the effect of temperature and stress gradients on accelerated EM test for Cu narrow interconnects,”
*Thin Solid Films*, vol. 504, no. 1-2, pp. 288-293, 2006. - C. M. Tan, W. Li, K. T. Tan, and F. Low. “Development of highly accelerated electromigration test,”
*Microelectronics Reliability*, vol. 46, no. 9-11, pp. 1638-1642, 2006. - A. Roy, R. Kumar, C. M. Tan, T. Wong, and C. H. Tung. “Electromigration in damascene copper interconnects of line width down to 100 nm,”
*Semiconductor Science and Technology*, vol. 21, pp. 1369, 2006. - A. Roy and C. M. Tan. “Experimental investigation on the impact of stress free temperature on the electromigration performance of copper dual damascene submicron interconnect,”
*Microelectronics Reliability*, vol. 46, no. 9-11, pp. 1652-1656, 2006. - C. M. Tan, A. Roy, A. V. Vairagar, A. Krishnamoorthy, and S. G. Mhaisalkar. “Current crowding effect on copper dual damascene via bottom failure for ULSI applications,”
*IEEE Trans. on Device and Materials Reliability*, vol. 5, no. 2, pp. 198, 2005. - A. Roy, C. M. Tan, R. Kumar, and X. T. Chen. “Effect of test condition and stress free temperature on the electromigration failure of Cu dual damascene submicron interconnect line-via test structures,”
*Microelectronics Reliability*, vol. 45, no. 9-11, pp. 1443-1448, 2005. - C. M. Tan, A. Roy, K. T. Tan, D. Sim, K. Ye, and F. Low. “Effect of vacuum break after the barrier layer deposition on the electromigration performance of aluminum based line interconnects,”
*Microelectronics Reliability*, vol. 45, no. 9-11, pp. 1449-1454, 2005. - C. M. Tan and G. Zhang. “Overcoming intrinsic weakness of ULSI metallization electromigration performances,”
*Thin Solid Films*, vol. 462-463, pp. 263-268, 2004. - Z. L. Yuan, D. H. Zhang, C. Y. Li, K. Prasad, and C. M. Tan. “Study of Interactions between a-Ta films and SiO2 under rapid thermal annealing,”
*Thin Solid Films*, vol. 462-463, pp. 279, 2004. - Z. L. Yuan, D. H. Zhang, C. Y. Li, J. Sudijono, and C. M. Tan. “Thermal Stability of Cu/a-Ta/SiO2/Si structures,”
*Thin Solid Films*, vol. 462-463, pp. 284, 2004. - Z. W. Yang, D. H. Zhang, C. Y. Li, C. M. Tan, and K. Prasad. “Barrier layer effects on reliabilities of copper metallization,”
*Thin Solid Films*, vol. 462-463, pp. 288, 2004. - C. M. Tan, G. Zhang, and Z. Gan. “Dynamics Study of the physical processes in the Intrinsic line electromigration of deep-submicron copper and aluminum interconnects,”
*IEEE Transactions on Device and Materials Reliability*, vol. 4, no. 3, pp. 450-456, 2004. - C. M. Tan and Z. Gan. “Failure mechanisms of aluminum bond pad peeling during thermosonic bonding,”
*IEEE Transactions on Device and Materials Reliability*, vol. 3, no. 2, pp. 44-50, 2003. - Z. L. Yuan, D. H. Zhang, C. Y. Li, K. Prasad, L. J. Tang, and C. M. Tan. “A new method for deposition of cubic Ta diffusion barrier for Cu metallization,”
*Thin Solid Films*, vol. 434, no. 1-2, pp. 126-129, 2003. - C. M. Tan and S. Y. Lim. “Application of wigner-ville distribution in electromigration noise analysis,”
*IEEE Transactions on Device and Materials Reliability*, vol. 2, no. 2, pp. 30-35, 2002.

C. M. Tan. “Effect of BOE etching time on wire bonding quality,” *IEEE Transactions on Components and Packaging Technologies*, vol. 22, no. 4, pp. 551-557, 1999.

- Zequn Zeng, Preetpal Singh, Sharon Lim Xiaodai, Cher Ming Tan and Chorng Haur Sow “ In-situ Characterization of the Defect Density in Reduced Graphene Oxide under Electrical Stress Using Fluorescence Microscopy”, International Journal of Nanotechnology, International Journal of Nanotechnology 2020 Vol.17 No.1 10.1504/IJNT.2020.109350
- Udit Narula, Cher Ming Tan*, “Qualitative Analysis of Growth Parameters for Low Temperature Graphene Synthesis using Design-of-Experiments,” Frontiers in Materials, 5:43, July 2018
- Udit Narula, Cher Ming Tan*, Eng Soon Tok, “Metal on Graphenated-Metal for VLSI Interconnects,” Advanced Materials Interfaces, vol. 5, issue 13, p. 1800270, July 2018.
- U. Narula, C. M. Tan, “Engineering a PVD Based Graphene Synthesis Method,”
*IEEE Transactions on Nanotechnology*, vol. 16, Issue 5, pp.784-789, Sep. 2017. - Udit Narula, Cher Ming Tan, Chao Sung Lai. “Growth Mechanism for Low Temperature PVD Graphene Synthesis on Copper Using Amorphous Carbon,”
*Scientific Reports*, vol. 7, no. 44112, pp1-13, March 2017. - Udit Narula and Cher Ming Tan, “Determining the Parameters of Importance of a Graphene Synthesis Process Using Design-of-Experiments Method,”
*Applied Sciences*, Vol. 6, 204, pp1-16, July 2016. - U. Narula, C. M. Tan, C. S. Lai, “Copper induced synthesis of graphene using amorphous carbon,”
*Microelectronics Reliability*, Vol. 61, pp87-90, June 2016. - C. M. Tan, C. Baudot, Y. D. Han, and H. Jing. “Applications of multi-walled carbon nanotube in electronic packaging,”
*Nanoscale Research Letters*, vol. 7, pp. 1-7, March 2012. - J. H. Zhao, C. M. Tan, K. T. Beng, and S. A. F. Peel. “Effect of hydrophilicity of carbon nanotube arrays on the release rate and activity of recombinant human bone morphogenetic protein-2,”
*Nanotechnology*, vol. 22, no. 29, pp. 295712, 22nd Jul. 2011. - C. Baudot and C. M. Tan. “Covalent functionalization of carbon nanotubes and their use in dielectric epoxy composites to improve heat dissipation,”
*Carbon*, vol. 49, no. 7, pp. 2362-2369, 2011. - C. Baudot, C. M. Tan, and J. C. Kong. “FTIR spectroscopy as a tool for nano-material characterization,”
*Infrared Physics & Technology*, vol. 53, no. 6, pp. 434-8, Nov. 2010. - S. Li, A. K. Ng, J. W. Rong, C. M. Tan, Y, Yang, and Y Chen. “Antibacterial action of dispersed single-walled carbon nanotubes on Escherichia coli and Bacillus subtilis investigated by atomic force microscopy,”
*Nanoscale*, vol. 2, no. 12, pp. 2744-50, Nov. 2010. - Z. Han, B. Tay, C. M. Tan, M. Shakerzadeh, and K. Ostrikov. “Electrowetting control of cassie-to-wenzel transitions in superhydrophobic carbon nanotube-based nanocomposites,”
*ACS Nano*, vol. 3, pp. 3031-3036, 2009. - C. Baudot and C. M. Tan. “Solubility, dispersion and bonding of functionalised carbon nanotubes in epoxy resins,”
*International Journal of Nanotechnology*, vol. 6. No. 7-8, pp. 618-627, 2009. - M. Gu, C. Q. Sun, C. M. Tan, and S. Wang. “Local bond average for the size and temperature dependence of elastic and vibronic properties of nanostructures,”
*International Journal of Nanotechnology*, vol. 6, no. 7-8, pp. 640-652, 2009. - A. Roy, C. M. Tan, S. OShea, H. Kedar, and W. Hofbauer. “Room temperature observation of point defect on gold surface using thermovoltage mapping,”
*Microelectronics Reliability*, vol. 47, no. 9-11, pp. 1580-1584, 2007. - T. Xu, Z. Wang, J. Miao, X. Chen, and C. M. Tan. “Aligned carbon nanotubes for through-wafer interconnects,”
*Applied Physics Letters*, vol. 91, no. 4, pp. 042108, 2007. - M. X. Gu, C. Q. Sun, Z. Chen, T. C. A. Yeung, S. Li, C. M. Tan, and V. Nosik. “Size, temperature and bond nature dependence of elasticity and its derivatives on extensibility, debye temperature, and heat capacity of nanostructures,”
*Physical Review B*, vol. 75, no. 12, pp. 125403, 2007. - M. X. Gu, T. C. A. Yeung, V. Nosik, and C. M. Tan. “Change in thermal conductivity of cylindrical silicon nanowires induced by surface bonding modification,”
*Journal of Applied Physics*, vol. 100, pp. 94304, 2006. - C. M. Tan, J. J. Jia, and W. Yu. “Temperature dependence of the field emission of multiwalled carbon nanotubes,”
*Applied Physics Letters*, vol. 86, no. 26, pp. 263104, 2005. - C. M. Tan, J. M. Xu, and S. Zukotynski. “Electronic properties of n-i-n-i doping superlattices,”
*Journal of Applied Physics*, vol. 73, no. 6, pp. 2921, 1992. - C. M. Tan and J. Xu. “Assessment of the performance potential of a quantum resonant tunneling structure under current density constraint,”
*International Journal of Electronics*, vol. 70, no. 4, pp. 703-712, 1991. - C. M. Tan, J. Xu, and S. Zukotynski. “Study of resonant tunneling structures: a hybrid incremental airy function plane wave approach,”
*Journal of Applied Physics*, vol. 67, no. 6, pp. 3011-3017, 1990.

- C. M. Tan, U. Narula, G. L. Seow, V. Sangwan, C. H. Chen, S. P. Lin, and J. Y. Chen, “Moisture Resistance Evaluation on Single Electronic Package Moulding Compound”, Journal of Materials Chemistry C, 2020, DOI:10.1039/C9TC04298A.
- Xiangchen Chen and Cher Ming Tan, “Modeling and analysis of gate-all-around silicon nanowire FET,”
*Microelectronics Reliability*, Volume 54, Issues 6–7, Pages 1103–1108, June–July 2014. - Cher Ming Tan and Xiangchen Chen, “Degradation mechanisms in gate-all-around silicon Nanowire field effect transistor under electrostatic discharge stress – a modeling approach,”
*Nano convergence*, vol 1 (1), pp. 1-11 April 2014. - Asenov A, Schlichtmann U.M. Cher Ming Tan, Hei Wong and Zhou Xing, “ICMAT 2011 – Reliability and variability of semiconductor devices and ICs”,
*Microelectronics Reliability*, v 52(8), p. 1531, August 2012. - C. M. Tan and G. Huang. “Comparison of SOI and PSOI LDMOS using electrical-thermal-stress coupled field modeling,”
*IEEE Transactions on Electron Devices*, vol. 58, no. 10, pp. 3494-500, Oct. 2011. - G. Huang and C. M. Tan. “Electrical-thermal-stress coupled-field effect in SOI and partial SOI lateral power diode,”
*IEEE Transactions on Power Electronics*, vol. 26, no. 6, pp. 1723-1732, 2011. - J. Liao, C. M. Tan and G. Spierings. “Hot carrier reliability of power SOI EDNMOS,”
*IEEE Transactions on Power Electronics*, vol. 25, no. 7, pp. 1685-91, 2010. - J. Liao, C. M. Tan and G. Spierings. “Behavior of hot carrier generation in power SOI LDNMOS with shallow trench isolation (STI),”
*Microelectronics Reliability*, vol. 49, pp. 1038-1043, 2009. - C. M. Tan and N. Raghavan. “An approach to statistical analysis of gate oxide breakdown mechanisms,”
*Microelectronics Reliability*, vol. 47, no. 9-11, pp. 1336-1342, 2007. - C. M. Tan and G. Huang. “Reverse breakdown voltage measurement for power P+NN+ rectifier,”
*Journal of Electronic Testing-Theory and Applications*, vol. 24, no. 5, pp. 473-479, 2007. - G. Huang and C. M. Tan. “Device level electrical-thermal-stress coupled-field modeling,”
*Microelectronics Reliability*, vol. 46, no. 9-11, pp. 1823-1827, 2006. - C. M. Tan, Z. Gan, W. F. Ho, S. Chen, and R. Liu. “Determination of the dice forward I-V characteristics of a power diode from a packaged device and its applications,”
*Microelectronics Reliability*, vol. 45, no. 1, pp. 179-184, 2005. - C. M. Tan, J. Chiu, R. Liu, and G. Zhang. “Reliability screening through electrical testing for press-fit alternator power diode in automotive application,”
*Microelectronics Reliability*, vol. 45, no. 9-11, pp. 1723-1727, 2005. - Z. Gan and C. M. Tan. “Thermally induced stress in partial SOI structure during high temperature processing,”
*Microelectronic Engineering*, vol. 71, no. 2, pp. 150-162, 2004. - C. M. Tan, Z. Gan, and X. Gao. “Temperature and stress distribution in the SOI structure during fabrication,”
*IEEE Transactions on Semiconductor Manufacturing*, vol. 16, no. 2, pp. 314-318, 2003. - C. M. Tan and K. J. Tseng. “Using power diode models for circuit simulations – a comprehensive review,”
*IEEE Transactions on Industrial Electronics*, vol. 46, no. 3, pp. 637-645, 1999.

- Dipesh Kapoor, Cher Ming Tan, and Vivek Sangwan, “Evaluation of the Potential Electromagnetic Interference in Vertically Stacked 3D Integrated Circuits”,
*Applied Sciences 10, no. 3, pp. 748,*2020. - Vivek Sangwan, Dipesh Kapoor, Cher Ming Tan, Chia Han Lin, and Hsien Chin Chiu, “High Frequency Electromagnetic Simulation and Optimization for GaN-HEMT Power Amplifier IC”, IEEE Transactions on Electromagnetic Compatibility, vo. 61, Issue 2, pp.564-571, Apr 2019.
- Dipesh Kapoor, Vivek Sangwan, Cher Ming Tan, “Electromagnetic Hotspots Identification in Integrated Circuits”, Progress in Electromagnetics Research (PIER) Letters, vol.86, pp. 121-128, 2019.
- Kapoor, D.; Sangwan, V.; Tan, C.M.; Paliwal, V.; Tanwar, N. Optimization of a T-Shaped MIMO Antenna for Reduction of EMI.
*Appl. Sci.*2020,*10*, 3117.

- Dipesh Kapoor, Cher Ming Tan, and Vivek Sangwan, “Evaluation of the Potential Electromagnetic Interference in Vertically Stacked 3D Integrated Circuits”,

- Cher Ming Tan, Udit Narula, Lu An Lai, Sumit Pandey, Jung Hua Tung, Chung Yi Li, “Optimal Maintenance Strategy on Medical Instruments used for Haemodialysis Process”, Eksploatacja I Niezawodność – Maintenance And Reliability, Vol. 21, issue 2, pp. 318-328, February 2019.
- L. M. Duc, C.M. Tan, M. Luo and I. C. H. Leng “Maintenance Scheduling of Plasma Etching Chamber in Wafer Fabrication for high yield etching process”,
*IEEE Trans. On Semiconductor Manufacturing*, vol. 27, no. 2, pp. 204-211, May 2014*.* - M. D. Le and C. M. Tan. “Optimal maintenance strategy of deteriorating system under imperfect maintenance & inspection using mixed inspection scheduling,”
*Reliability Engineering & System Safety*, V. 113(1), p. 21-29, Jan. 2013. - C. M. Tan. “Recent developments in engineering system maintenance,”
*The Singapore Engineer Magazine*, Dec. 2012. - C. M. Tan and N. Raghavan. “Reply to comments on “A framework to practical predictive maintenance modeling for multi-state systems,”
*Reliability Engineering & System Safety*, vol. 94, no. 3, pp. 781-782, 2009. - C. M. Tan and N. Raghavan. “A framework to Practical Predictive Maintenance Modeling for Multi-State Systems,”
*Reliability Engineering & System Safety*, vol. 93, pp. 1138, 2008. - C. M. Tan and N. Raghavan. “Root cause analysis based maintenance policy,”
*International Journal of Quality and Reliability Management*, 24(2), 203-228, 2007.

- C. M. Tan, W. Yu, and W. Jun. “Comparison of medium-vacuum and plasma-activated low-temperature wafer bonding,”
*Applied Physics Letters*, vol. 88, no. 11, pp. 114102, 2006. - C. M. Tan, S. Deng, J. Wei, W. B. Yu, S. M. L. Nai, and H. Xie. “Low temperature sol-gel intermediate layer wafer bonding,”
*Thin Solid Films*, vol. 496, no.2, pp. 560, 2006. - C. M. Tan, S. Deng, J. Wei, and W. B. Yu. “Mechanism of sol-gel intermediate layer low temperature wafer bonding,”
*Journal of Physics D-Applied Physics*, vol. 38, no. 8, pp. 1308-1312, 2005. - W. B. Yu, C. M. Tan, J. Wei, S. S. Deng, and G. Huang. “Effect of medium vacuum on low temperature wafer bonding,”
*Journal of Micromechanics and Microengineering*, vol. 15, no. 5, pp. 1001, 2005. - W. B. Yu, J. Wei, and C. M. Tan. “Mathematical model for low-temperature wafer bonding under medium vacuum and its application,”
*IEEE Transactions on Advanced Packaging*, vol. 28, no. 4, pp. 650-658, 2005. - W. B. Yu, C. M. Tan, J. Wei, S. S. Deng, and S. M. L. Nai. “Influence of applied load on vacuum wafer bonding at low temperature,”
*Sensors and Actuators A-Physical*, vol. 115, no. 1, pp. 67-72, 2004. - S. S. Deng, J. Wei, C. M. Tan, S. M. L. Nai, W. B. Yu, and H. Xie. “Low temperature silicon wafer bonding by sol-gel processing,”
*International Journal of Computational Engineering Science*, vol. 4, no. 3, pp. 655-658, 2003.

- F. He and C. M. Tan. “3D simulation-based research on the effect of interconnect structures on circuit reliability,” World Journal of Modelling and Simulation, vol. 8, no. 4, pp. 271-284, Nov. 2012.
- S. Lan, C. M. Tan, and K. Wu. “Reliability study of LED driver – a case study of black box testing,” Microelectronics Reliability, vol. 52, no. 9-10, pp. 1940-4, Sep.-Oct. 2012.
- F. He and C. M. Tan. “Effect of IC layout on the reliability of CMOS amplifiers,” Microelectronics Reliability, vol. 52, no. 8, pp. 1575-80, Aug. 2012.
- F. He and C. M. Tan. “Comparison of electromigration simulation in test structure and actual circuit,” Applied Mathematical Modelling, vol. 36, no. 10, pp. 4908-4917, Oct. 2012.
- F. He and C. M. Tan. “Electromigration reliability of interconnections in RF low noise amplifier circuit,”
*Microelectronics Reliability*, vol. 52, no. 2, pp. 446-454, Feb. 2012 - F. He and C. M. Tan. “Modeling the effect of barrier thickness and low-k dielectric on circuit reliability using 3D model,”
*Microelectronics Reliability*, vol. 50, pp. 1327-1331, 2010. - F. He and C. M. Tan. “Circuit level interconnect reliability study using 3D circuit model,”
*Microelectronics Reliability*, vol. 50, no. 3, pp. 376-390, 2010.

- Vivek Sangwan, Cher Ming Tan, Dipesh Kapoor, Hsein-Chin Chiu, “Electromagnetic Induced Failure in GaN-HEMT High Frequency Power Amplifier”, IEEE Transactions on Industrial Electronics, vol. 67, Issue 7, pp. 5708-5716, July 2020.
- Cher Ming Tan and Wenzhi Yu, “Damage Threshold Determination and Non-destructive Identification of Possible Failure Sites in PIN Limiter”,
*Microelectronics Reliability*, vol. 54, no. 5, pp. 960-964, May 2014. - C. M. Tan, S. Yanuar, and T. C. Chai. “Finite element modeling of capacitive coupling voltage contrast,”
*Microelectronics Reliability*, vol. 47, no. 9-11, pp. 1555-1560, 2007. - C. M. Tan, Z. Gan, and T.C. Chai. “Feasibility study of the application of voltage contrast to printed circuit board,”
*Microelectronics Reliability*, vol. 46, no. 5-6, pp. 939-948, 2006. - C. M. Tan, K. P. Lim, T. C. Chai, and J. Lim. “Non-destructive identification of open circuit in wiring on organic substrate with high wiring density covered with solder resist,”
*Microelectronics Reliability*, vol. 45, no. 9-11, pp. 1572-1575, 2005. - C. M. Tan, K. M. Ang, L. H. Tay, and Y. M. Tan. “Investigation of weight-on-wheel switch failure in F-16 aircraft,”
*Engineering Failure Analysis*, vol. 12, no. 4, pp. 508-519, 2005. - Z. Gan, C. M. Tan, and G. Zhang. “Non-destructive void size determination in copper metallization under passivation,”
*IEEE Transactions on Device and Materials Reliability*, vol. 3, no. 3, pp. 69-78, 2003. - C. M. Tan, E. Er, Y. Hua, and V. Chai. “Failure analysis of bond pad metal peeling using FIB and AFM,”
*IEEE Transactions on Components and Packaging Technologies*, vol. 21, no. 4, pp. 585-591, 1998.

- C. M. Tan and N. Raghavan. “Unveiling the electromigration physics of ULSI interconnects through statistics,”
*Semiconductor Science and Technology*, vol. 22, no. 8, pp. 941-946, 2007. - G. Zhang, C. M. Tan, K. T. Tan, K. Y. Sim, and W. Y. Zhang. “Reliability improvement in Al metallization: a combination of statistical prediction and failure analytical methodology,”
*Microelectronics Reliability*, vol. 44, no. 9-11, pp. 1843-1848, 2004. - C. M. Tan and K. N. C. Yeo. “A reliability statistics perspective on the pitfalls of standard wafer-level electromigration accelerated test (SWEAT),”
*Journal of Electronic Testing-Theory and Applications*, vol. 17, no. 1, pp. 63-68, 2001.

- Sze Li Harry Lim, Duong Pham, Hyunseok park, Preetpal Singh, Cher Ming Tan and Nagarajan Raghavan “Assessing Multi-Output Gaussian Process Regression for Modeling of Non-Monotonic Degradation Trends of Light Emitting Diodes in Storage”, Microelectronics Reliability, accepted 2020.
- Preetpal Singh, Cher Ming Tan, Wenyu Zhao, Hao-Chung Kuo, “Investigation of the impact of Drive current and phosphor thickness on the reliability of High Power White LED lamp”,
- Preetpal Singh & Cher Ming Tan, “Time evolution of packaged LED lamp degeneration in outdoor applications”, Optical Materials, Vol. 86, pp. 148-154, Dec 2018.
- P. Singh, C. M. Tan, C. W. Liu, C. R. Lin, J. H. Tung, “Moisture resistance coating for high power white leds using diamond like carbon”, Archives of Physics Research, Vol. 9 (1), pp. 41-46, July 2018.
- Ying-Chang Li, Yuan-Hsiao Chang, Preetpal Singh, Liann-Be Chang *,Der-Hwa Yeh, Ting-Yu Chao, Si-Yun Jian, Yu-Chi Li, Cher-Ming Tan, Chao-sung Lai, Lee Chow, Shang-Ping Ying. “RGB-Stack Light Emitting Diode Modules with Transparent Glass Circuit Board and Oil Encapsulation” Materials, 11(3), 365, Mar 2018.
- Cher Ming Tan, Preetpal Singh, Wenyu Zhao, Hao-Chung Kuo, “Physical Limitations of Phosphor layer thickness and concentration for White LEDs”, Scientific Reports 8, no. 1, Jan 2018.
- Preetpal Singh, Cher Ming Tan, “Uncover the degradation science of silicone under the combined temperature and humidity conditions”, IEEE Access, Issue: 99, pp. 1302-1311, November 2017.
- P. Singh, D. H. Yeh, C. M. Tan, C.S. Lai, C. T. Hou, T. Y. Chao, and L.B. Chang, “Output Properties of Transparent Submount Packaged FlipChip Light-Emitting Diode Modules”,
*Applied Sciences*, Vol. 6, no. 179, pp. 1-8, June 2016. - Preetpal Singh & Cher Ming Tan, “Degradation Physics of High Power LEDs in Outdoor Environment and the Role of Phosphor in the degradation process”,
*Scientific Reports*, Vol. 6, no. 24052, pp. 1-13, April, 2016. - Preetpal Singh, Cher Ming Tan, Liann-Be Chang, “Early degradation of high power packaged LEDs under humid conditions and its recovery — Myth of reliability rejuvenation”,
*Microelectronics Reliability*, Vol. 61, pp145-153, June 2016. - Preetpal Singh, Cher Ming Tan, “A review on the humidity reliability of high power white light LEDs,”
*Microelectronics Reliability*, Vol 61, pp129-139, June 2016. - S. Lan, C.M. Tan*, “Application of particle filter technique for lifetime determination from degradation study on a LED Driver”,
*IEEE Transactions on Device and Materials Reliability*, vol. 15, no. 2, pp. 163-173, June 2015. - Song Lan, Cher Ming Tan, “Degradation Model of a Linear-Mode LED Driver and its Application in Lifetime Prediction,”
*IEEE Transactions on Device and Materials Reliability*, vol.14, no.3, pp.904-913, September 2014. - Song Lan, Cher Ming Tan, Kevin Wu, “Methodology of reliability enhancement for high power LED driver”,
*Microelectronics Reliability*, vol. 54, Issues 6–7, pp. 1150-1159, June–July, 2014. - C.M. Tan and P. Singh, “Time Evolution Degradation Physics in High Power White LEDs Under High Temperature-Humidity Conditions”,
*IEEE Trans. On Devices and Materials Reliability*, Vol. 14, no. 2, pp. 742-750, June 2014. - Cher Ming Tan, Sihan Chen, Jacky Kong, “Effects of carbon loading on the performance of functionalized carbon nanotube polymer heat sink for high power light-emitting diode in switching applications”,
*IEEE Transactions on Nanotechnology,*Vol.12, no.6, pp1104-1110, Nov. 2013. - C. M. Tan and C. S. Lai. “Systematic root cause analysis for GaP green light LED degradation
*,” IEEE Trans. On Devices and Materials Reliability*, Vol. 13, n 1, pp156-160, March 2013. - S. H. Chen, C. M. Tan, G. H. Tan, and F. He. “Degradation behavior of high power light emitting diode under high frequency switching,”
*Microelectronics Reliability*, vol. 52, no. 9-10, pp. 2168-2173, Sep.-Oct. 2012. - C. M. Tan, S. H. Chen, and E. Chen. “Rapid light output degradation of GaN based packaged LED in the early stage of humidity test,”
*IEEE Transactions on Device and Materials Reliability*, vol. 12, no. 1, pp. 44-48, Mar. 2012. - S. H. Chen, C. M. Tan, and E. Chen. “Ensuring accuracy in optical and electrical measurement of ultra-bright LEDs during reliability test,”
*Microelectronics Reliability*, vol. 52, no. 8, pp. 1632-5, Aug. 2012. - C. M. Tan, B. K. E. Chen, G. Xu, and Y. Liu. “Analysis of humidity effects on the degradation of high-power white LEDs,”
*Microelectronics Reliability*, vol. 49, pp. 1226-1230, 2009.

- C. M. Tan. “Identifying key parameters for risk based inspections (RBI),”
*Hydrocarbon Asia*, pp. 60-64, 2004. - C. M. Tan. “Methodology for customer’s focus build-in reliability,”
*International Journal of Quality and Reliability Management*, vol. 20, no. 3, pp. 378-397, 2003.

- Tan, C.M.; Singh, P.; Chen, C. Accurate Real Time On-Line Estimation of State-of-Health and Remaining Useful Life of Li ion Batteries.
*Appl. Sci.***2020**,*10*, 7836. - Loganathan MK, Mishra B, Tan CM, Kongsvik T, Rai RN. Multi-Criteria decision making (MCDM) for the selection of Li-Ion batteries used in electric vehicles (EVs). Materials Today: Proceedings. 2020 Aug 10.
- Preetpal Singh, Che Chen, Cher Ming Tan, Shyh-Chin Huang, “Semi-Empirical capacity fading model for SoH estimation of Li-Ion Batteries”, Applied Sciences, Vol.9, issue 15, pp. 3012, July 2019.
- Feng Leng, Zhongbao Wei, Cher Ming Tan, Rachid Yazami, “Hierarchical degradation processes in lithium-ion batteries during ageing”
*Electrochimica Acta*, Vol. 256, pp 52-62, Oct. 2017. - Feng Leng, Cher Ming Tan, Michael Pecht, “Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature”
*Scientific Reports*, vol. 5, pp. 12967, Aug. 2015. - Zhitao Liu, Cher Ming Tan*, Feng Leng, “A reliability based design concept for lithium-ion battery pack in electric vehicles”,
*Reliability Engineering & System safety*, vol. 134, pp. 169–177, February 2015. - Feng Leng, Cher Ming Tan*, Rachid Yazami and Minh Duc Le, “A practical framework of electrical based online state-of-charge estimation of lithium ion batteries”,
*Journal of Power Sources*, vol. 255, pp. 423-430., June 2014.

- Chiang, Y.; Tan, C.M.; Chao, T.-C.; Lee, C.-C.; Tung, C.-J. Investigate the Equivalence of Neutrons and Protons in Single Event Effects Testing: A Geant4 Study.
*Appl. Sci.***2020**,*10*, 3234.

Shuai Zhang, Cher Ming Tan, Shuguang Cheng, Tianqi Deng, Feifei He and Haibin Su, “Ab initio simulation of electronic and mechanical properties of aluminium for fatigue early feature investigation”, International Journal of Nanotechnology, Vol.11, No.1/2/3/4, pp. 373 – 385, November 2014.

Analytical modeling electrical conduction in resistive-switching memory through current-limiting-friendly combination frameworks, AIP Advances 10, 085117 (2020); https://doi.org/10.1063/5.0019266

- Sumit Pandey, Cher Ming Tan, Hsiao-Wen Chen, Yao En Xie, Jung Hua Tung, Yu-Chuan Kau, Chia-Chih Liao, “Pulse Oximeter for Low SpO2 Level Detection Using Discrete Time Signal Processing Algorithm”, Journal of Medical Devices, vol.13, issue 2: 021011, Jun 2019
- J. H. Tung, C. S. Chen, W. Y. Zhao and C. M. Tan, “Optimization of sandblasting process of complex 3D surface polishing using variable viscoelastic diamond particles abrasive”, Machining Science and Technology, pp. 1-13, Aug 2018. doi:10.1080/10910344.2018.1486413.
- Z. Wu, X. Tian, Z. Wang, C. Gong, S. Yang, C. M. Tan, and P. K. Chu. “Microstructure and mechanical properties of CrN films fabricated by high power pulsed magnetron discharge plasma immersion ion implantation and deposition,”
*Applied Surface Science*, vol. 258, no. 1, pp. 242-6, 15th Oct. 2011. - C. M. Tan, B. K. Chen, and K. P. Toh. “Humidity study of a-Si PV cell,”
*Microelectronics Reliability*, vol. 50, pp. 1871-1874, 2010. - Z. Gan, G. Yu, Z. Zhao, C. M. Tan, and B. K. Tay. “Mechanical properties of Zirconia Thin Films deposited by filtered cathodic vacuum arc,”
*Journal of the American Ceramic Society*, vol. 88, no. 8, pp. 2227-2229, 2005. - P. Zhao, E. Rusli, J. H. Xia, C. M. Tan, Y. Liu, C. C. Tin, S. F. Yoon, W. G. Zhu, and J. Ahn. “Study of carbon in thermal oxide formed on 4H-SiC by XPS,”
*Silicon Carbide and Related Materials 2004, Materials Science Forum*, vol. 483-485, pp. 653-656, 2005. - Z. Gan, Y. Zhang, G. Yu, C. M. Tan, S. P. Lau, and B. K. Tay. “Intrinsic mechanical properties of diamond-like carbon thin films deposited by filtered cathodic vacuum arc,”
*Journal of Applied Physics*, vol. 95, no. 8, pp. 3509, 2004. - Z.L. Yuan, D.H. Zhang, C.Y. Li, K. Prasad, C.M. Tan, “Study of interactions between α-Ta films and SiO2 under rapid thermal annealing,”
*Thin Solid Films*, v 462-463, p 279-283, September 2004 - Z.L. Yuan, D.H. Zhang, C.Y. Li, K. Prasad, C.M. Tan, “Thermal stability of Cu/α-Ta/SiO2/Si structures”,
*Thin Solid Films*, v 462-463, p 284-287, September 2004 - Z. H. Gan, G. Q. Yu, B. K. Tay, C. M. Tan, Z. W. Zhao, and Y. Q. Fu. “Preparation and characterization of copper oxide thin films deposited by filtered cathodic vacuum arc,”
*Journal of Physics D-Applied Physics*, vol. 37, no. 1, pp. 81-85, 2004. - S. Zukotynski, F. Gaspari, N. Kherani, T. Kosteski, K. Law, W. T. Shmayda, C. M. Tan. “Metastability in tritiated amorphous silicon,”
*Journal of Non-Crystalline solids*, vol. 299-302, Part 1, pp. 476-481, 2002. - C. M. Tan, S. Zukotynski, and H. Mar. “Effect of Current Density on the Electrochemical Dissolution of Germanium and Zinc Selenide,”
*Journal of the Electrochemical Society*, vol. 137, no. 2, pp. 3970-3972, 1990. - C. M. Tan and S. Zukotynski. “Single Wafer Miniature Hall-Effect Keyboard,”
*IEEE Transactions on Industrial Electronics*, vol. 36, no. 3, pp. 446-450, 1989.

#### CONFERENCE PAPERS

- J. M. Chan, C. M. Tan, K. C. Lee, W. Kanert, C. S. Tan, “Non-destructive Degradation Study of Copper Wire Bond for Its Temperature Cycling Reliability Evaluation”,
*International Conference on Materials for Advanced Technologies*, Singapore, 28 June, 2015. - Cher Ming Tan and Udit Narula, “Revisit resistance monitoring techniques for measuring TSV/Solder resistance during Electromigration test”,
*2014 12**th**IEEE International Conference on Solid State and Integrated Circuits Technology(ICSICT)*, Guilin, China, 28-31 Oct., 2014, pp.1-7. Doi: 10.1109/ICSICT.2014.7021168 - Cher Ming Tan, “Extending electromigration modeling from test structures to Integrated circuit layout level”, Invited talk in
*International Reliability Physics Symposium*, HI USA, 01-05 Jun., 2014. - J. Zhang, K. Ghosh, L. Zhang, Y. Dong, H. Y. Li, C. M. Tan, G. Xia, and C. S. Tan, “TSV scaling with constant liner thickness and the related implications on thermo-mechanical stress, capacitance, and leakage current,” in
*Int. Conf. on Solid State Devices and Materials*, Kyoto, Japan, 25-27th Sep. 2012. - K. Ghosh, J. Zhang, L. Zhang, Y. Dong, H. Y. Li, C. M. Tan, G. Xia, and C. S. Tan, “Strategy for TSV scaling with consideration on thermo-mechanical stress and acceptable delay,” in
*Int. Microsystems, Packaging, Assembly Circuits Technology Conf.*, Taipei, Taiwan, 24-26th Oct. 2012. - C. M. Tan and C. Fu. “Effectiveness of Reservoir Length on Electromigration lifetime enhancement for ULSI Interconnects with advanced technology nodes (Invited Talk),” in
*Proc. of IEEE ICSICT*, Xi’an, China, 29th Oct. – 1st Nov. 2012. - W. Li and C. M. Tan. “Black’s equation for today’s ULSI interconnect electromigration (invited),” in
*Proc. of IEEE Electron Devices and Solid State Circuits*, China, 2011. - C. M. Tan, Z. Gan, and W. Li. “Applications of Finite element Methods for Reliability Study of ULSI Interconnections (Invited Talk),” presented at Int. Conf. on Materials for Advanced Technologies, Singapore, Jul. 2011.
- S. M. L Nai, Y. D. Han, H. Y. Jing, L. Y. Xu, C. M. Tan, and J. Wei. “Ageing study of interfacial intermetallic growth in a lead-free solder reinforced with Ni-coated carbon nanotubes,” in
*IEEE Electronics Packaging Technology Conf.*, 2010. - Y. D. Han, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. Tan, and J. Wei. “Indentation creep and hardness of a Sn-Ag-Cu solder reinforced with Ni coated carbon nanotubes,” in
*IEEE Int. Nanoelectronic Conf.*, Hong Kong , 2010, pp. 292-295. - Y. Hou and C. M. Tan. “Requirement for accurate interconnect temperature measurement for Electromigration test,” in
*IEEE Int. Symp. on Integrated Circuits*, Singapore, 2009. - S. M. L. Nai, Y. D. Han, H. Y. Jing, C. M. Tan, and J. Wei. “Enhancing the properties of a Lead-free solder with the addition of Ni coated carbon nanotubes,” in
*Int. Conf. on Electronic Packaging Technology & High Density Packaging*, China, 2009, pp. 540-543. - Y. D. Han, S. M. L Nai, Y. C. Liu, C. M. Tan, and J. Wei. “Indentation size effect on the hardness of a Sn-Ag-Cu Solder,” in
*Int. Mechanical Engineering Congress and Exposition*, 2009. - Y. D. Han, H. Y. Jing, S. M. L. Nai, Y. C. Liu, C. M. Tan, J. Wei, and L. Y. Xu. “Nanomechanical properties of a Sn-Ag-Cu solder reinforced with Ni coated carbon nanotubes,” in
*Int. Conf. on Materials for Advanced Technologies*, 2009. - Y. D. Han, H. Y. Jing, S. M. L. Nai, Y. C. Liu, C. M. Tan, J. Wei, and L.Y. Xu. “Indentation size effect on the creep behavior of a Sn-Ag-Cu solder,” in
*Int. Conf. on Materials for Advanced Technologies*, 2009. - C. M. Tan and Y. Liu. “Finite element modeling of Electromigration in ULSI Interconnections and in solder bumpings of a package system,” Tutorial in
*IEEE Int. Electronic Packaging and Technology Conf.*, 2008. - Y. Hou and C. M. Tan. “The multiple temperature heater platforms for solder Electromigration test conducted at room temperature,” in
*IEEE Electronics Packaging Technology Conf.*, Singapore, 2008. - Y. D. Han, C. M. Tan and W. Jun. “A new creep model for Sn-Ag-Cu lead-free composite solders: incorporating back stress,” in
*IEEE Electronics Packaging Technology Conf.*, Singapore, 2008. - P. Cheng, A. Lee, Z. X. Lim, N. Yantara, S. Z. Y. Loo, T. Y. Tee, C. M. Tan and Z. Chen. “Fracture Toughness Assessment of a solder joint using double cantilever beam specimens,” in
*IEEE Electronics Packaging Technology Conf.*, Singapore, 2008. - C. M. Tan and W. Li. “A holistic numerical modeling for interconnect electromigration,” (invited) presented at Int. Materials Research Society Conf., Chongqing, China, Jun. 2008.
- Y. Hou and C. M. Tan. “Size effect in Cu nano-interconnects and its implication on electromigration,” presented at IEEE Int. Nanoelectronics Conf., Shanghai, China, Mar. 2008.
- W. Li and C. M. Tan. “Enhanced finite element modelling of Cu electromigration using ANSYS and Matlab,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2007. - C. M. Tan. “Electromigration in ULSI Interconnection (keynote),” in
*1st Microreliability and Nanoreliability Congress*, 2007. - Y. Hou and C. M. Tan. “Blech effect in Cu interconnects with oxide and low-k dielectrics,” in
*Int. Symp. on physical and failure analysis of integrated circuits*, 2007. - A. Roy and C. M. Tan. “Experimental investigation on the impact of stress free temperature on the electromigration performance of copper dual damascene submicron interconnect,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2006. - C. M. Tan, W. Li, K. T. Tan, and F. Low. “Development of highly accelerated electromigration test,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2006. - W. Li and C. M. Tan. “Dynamic simulation of electromigration in polycrystalline thin film using combined Monte Carlo algorithm and finite element modeling,” in
*Symp. on Microelectronics*, 2006. - A. Roy, C. M. Tan, R. Kumar, and X. T. Chen. “Effect of test condition and stress free temperature on the electromigration failure of Cu dual damascene submicron interconnect line-via structures,” in
*European Symp. on Reliability of Electron Devices, Failure physics and Analysis*, 2005. - C. M. Tan, A. Roy, K. T. Tan, D. S. K. Ye, and F. Low. “Effect of vacuum break after the barrier layer deposition on the electromigratioin performance of aluminum based line interconnects,” in
*European Symp. on Reliability of Electron Devices, Failure physics and Analysis*, 2005. - A. Roy and C. M. Tan. “Extrapolation of electromigration reliability assessment from accelerated test for submicron interconnect via structure,” in
*Int. Conf. on Materials for advanced technologies*, 2005. - C. M. Tan. “Is electron wind force the sole driving force in electromingration of ULSI interconnection? (invited)” in
*Int. Conf. on Materials for Advanced Technologies*, 2005. - Y. K. Lim, A. Roy, K. L. Pey, C. M. Tan, C. S. Seet, T. J. Lee, and D. Vigar. “Stress migration reliability of wide Cu interconnects with Gouging Vias,” in
*Int. reliability physics Symp.*, 2005, pp. 203. - G. Zhang, C. M. Tan, K. T. Tan, K. Y. Sim, and W. Y. Zhang. “Reliability improvement in Al metallization: a combination of statistical prediction and failure analytical methodology,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2004, pp. 1843-1848. - A. Roy, C. M. Tan, V. V. Anand, K. Ahila, G. Zhang, and M. G. Subodh. “Effect of current crowding on copper dual damascene via bottom failure for ULSI applications,” in
*Int. Symp. on Physical and Failure Analysis of Integrated Circuits*, 2004. - A. Roy and C. M. Tan. “Current crowding effect on submicron copper dual damascene via bottom failure,” in
*Symp. on Microelectronics*, 2004. - C. M. Tan and G. Zhang. “Overcoming intrinsic weakness of ULSI metallization on electromigration performances,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003. - H. S. Park, J. K. Low, C. M. Tan, and A. See. “Effects of Cu surface cleanness on electromigration reliability of Cu interconnects,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003. - C. M. Tan and G. Zhang. “Investigation of the physical processes during electromigration of ULSI interconnection (invited),” in
*ANSYS User Meeting*, 2003. - C. M. Tan, A. C. M. Lim, C. T. Y. Tai, G. Zhang, H. S. Park, and S. M. Ong. “Effect of temperature uniformity of hot chuck on wafer level reliability electromigration test,” in
*JEDEX Conf.*, 2003. - G. Zhang, C. M. Tan, Z. Gan, K. Prasad, and D. H. Zhang. “Comparison of the time-dependent physical processes in the electromigration of deep submicron copper and aluminum interconnects,” in
*Materials Research Society Spring meeting*, 2003. - Z. L. Yuan, C. Y. Lia, D. H. Zhang, K. Prasad, C. M. Tan, Y. J. Yuan, P. W. Lu, R. Kumar, and P. D. Foo. “Improvement of Ta diffusion barrier by NH3 plasma pre-treatment,” in
*Int. Semiconductor Technology Conf.*, 2002. - Z. L. Yuan, D. H. Zhang, C. Y. Li, K. Prasad, C. M. Tan, R. Kumar, and P. D. Foo. “Characterization of a-Ta diffusion barrier for copper metallization,” in
*VMIC*, 2002. - Z. L. Yuan, D. H. Zhang, C. Y. Li, K. Prasad, C. M. Tan, Y. J. Yuan, P. W. Lu, R. Kumar, and P. D. Foo. “Cubic Ta diffusion barrier layers for Cu metallization,” in
*2nd Int. Semiconductor Technology Conf.*, 2002. - C. M. Tan, W. L. See, and J. K. C. Tey. “Analysis of electromigration test data,” in
*IEEE 6th Int. Conf. on Solid-state and Integrated Circuit Technology*, 2001, pp. 964. - S. Y. Lim, C. M. Tan, K. Prasad, and D. H. Zhang. “Uncover the diffusion mechanism of atoms during electromigration test using non-stationary noise analysis,” in
*6th Int. Conf. on Solid-state and integrated circuit Technology*, 2001, pp. 921.

- U. Narula, C. M. Tan, E. S. Tok, “Graphene as a Reducing Agent for Electroless Plating of Metal”, IEEE Nanotechnology Materials and Device Conference (NMDC), Portland, Oregon, USA, 14-17 October 2018.
- U. Narula, C.M. Tan, “Improvement in Electrical and Thermal Characteristics of Copper using PVD Based Graphene”,
*28**th**International Conference on Diamond and Carbon Materials*, Gothenburg, Sweden, 3-7 September 2017. - Udit Narula, Cher Ming Tan, “Engineering a PVD Based Graphene Synthesis Method”,
*11**th**IEEE Nanotechnology Materials and Devices Conference (NMDC 2016)*, Toulouse, France, 9th-12th October, 2016. - U. Narula, C. S. Lai and C. M. Tan, “Determination of key factors for low temperature graphene synthesis using design of experiments approach,”
*2016 IEEE International Nanoelectronics Conference (INEC)*, Chengdu, 9-11 May 2016, pp. 1-2. doi: 10.1109/INEC.2016.7589252 - Udit Narula, Cher Ming Tan, Chao Sung Lai, “Design of Experiments for Determination of Key Factors for Graphene Synthesis on Copper Using Amorphous Carbon- a statistical approach,”
*International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT 2016)*, Chennai, India, 03-05 March 2016, pp. 869-872. Doi: 10.1109/ICEEOT.2016.7754810 - Udit Narula, Cher Ming Tan, Chao Sung Lai,, “Thermally Stressed Copper Induced Synthesis of Graphene using Amorphous Carbon,”
*8**th**International Conference on Materials for Advanced Technologies*, Singapore, 28 June, 2015. - Udit Narula, C. S. Lai, C. M. Tan, “Copper Catalyzed Crystallization of Amorphous Carbon into Graphene,”
*International Electron Devices and Materials Symposium*, Hualian, Taiwan, November, 2014. - Cher Ming Tan and Xiangchen Chen, “ESD Degradation Modeling of Gate-All-Around Silicon Nanowire Device”, (Invited Talk), to be presented in
*Collaborative Conference on Materials Research*, Korea, 24-28 June 2013. - Xiangchen Chen and Cher Ming Tan, “Modeling and Analysis of Gate-All-Around Silicon Nanowire FET”, to be presented in
*International Conference on Materials for Advanced Technologies*, Singapore, 30 June- 5th July 2013. - S. Cheng, C. M. Tan, T. Deng, F. He, S Zhang, and H. Su. “Investigation of work function and surface energy of aluminum – an AB-Initio study,” in
*5th IEEE Int. Nanoelectronics Conf.*, Singapore, 2nd-4th Jan. 2013. - S. H. Chen, C. M. Tan, E. Tan, and J. Kong. “Effects of carbon loading on the performance of functionalized carbon nanotube polymer heat sink for ultra high power light-emitting diode,” in
*5th IEEE Int. Nanoelectronics Conf.*, Singapore, 2nd-4th Jan. 2013. - C. M. Tan, C. Baudot, Y. D. Han, and H. Jing. “Applications of multi-walled carbon nanotube (invited),” in
*IEEE Int. Nanoelectronics Conf., Taiwan, Jun. 2011*. - S. H. Chen, C. M. Tan, M. H. Tan, and B. K. Chen. “Performance evaluation of covalently functionalized carbon nano-tube polymer heat sink for ultra high power LED,” in
*IEEE Int. Nanoelectronics Conf., Taiwan, Jun. 2011.* - Y. D. Han, L. Y. Xu, H. Y. Jing, C. M. Tan, S. M. L Nai, and J. Wei. “Effect of Ni-coated carbon nanotubes on the microstructure and properties of a Sn-Ag-Cu solder,” in
*60th IEEE Electronic Components and Technology Conf.*, 2010. - Y. D. Han, H. Y. Jing, S. M. L. Nai, L. Y. Xu, C. M. TAN, and J. Wei. “Effect of Ni-coated carbon nanotubes on interfacial intermetallic layer growth,” in
*11th Electronic Packaging Technology Conf*., Singapore, 2009, pp. 292-295. - C. Baudot, C. M. Tan, J. Kong, F. Buonocore, and A. Di-Mateo. “Application of FTIR for the study of functional molecules grafting on carbon nanotubes,” presented at Advanced Materials for Nanotechnology, New Zealand, May 2009.
- S. M. L. Nai, Y. D. Han, H. Y. Jing, C. M. Tan, and J. Wei. “Using nanoparticles and carbon nanotubes to enhance the properties of a lead free solder,” in
*12th Nanotechnology Conf. & Expo*, USA, 2009, pp. 538-541. - C. Baudot, C. M. Tan, and C. Wang. “Nano-tailoring of carbon nanotube as nano-fillers for composite materials applications,” presented at IEEE Int. Nanoelectronics Conf., Shanghai, China, Mar. 2008.
- M. Gu, C. Q. Sun, C. M. Tan, and S. Wang. “Methodologies for size, and temperature dependent change of materials properties,” presented at IEEE Int. Nanoelectronics Conf., Shanghai, China, Mar. 2008.
- A. Roy, C. M. Tan, S. OShea, and W. Hofbauer. “Room temperature observation of point defect on gold surface using thermovoltage mapping,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2007. - C. M. Tan, J. Jia, L. K. Ang, K. T. Ng, and Y. C. Foo. “Effect of high voltage annealing on the field emission of multi-walled carbon nanotube film,” in
*5th IEEE Conf. on Nanotechnology*, 2005, pp. 638-641. - L. Huang, S. P. Lau, C. M. Tan, Z. Sun, and B. K. Tay. “Growth of carbon nanotubes using ZrFe catalyst layer and their field emission properties,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003.

- Udit Narula, Cher Ming Tan, “Challenges in Reliability Screening for High Power Diodes”,
*24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA 2017)*, Chengdu, China, 4-7 July, 2017. - C. M. Tan, L. Sun, N. Raghavan, C. Hsu, and C. Wang. “Comparative study of non-standard power diodes,” in
*IEEE Conf. on Industrial Electronics and Applications*, 2009. - G. Huang and C. M. Tan. “Device level electrical-thermal-stress coupled-field modeling,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2006. - G. Huang and C. M. Tan. “Device temperature and stress distributions in power diode – a finite element method,” in
*Int. Conf. on power electronics and drive systems*, 2005, pp. 700-703. - C. M. Tan, J. Chiu, R. Liu, and G. Zhang. “Reliability screening through electrical testing for press-fit alternator power diode in automotive application,” in
*European Symp. on Reliability of Electron Devices, Failure physics and Analysis*, 2005. - C. M. Tan, Z. Gan, W. F. Ho, S. Chen, and R. Liu. “Determination of the dice forward I-V characteristics of a power diode from a packaged device and its applications,” in
*Int. Conf. on power electronics and motion control*, 2004. - G. Huang, C. M. Tan, Z. Gan, G. Zhang, W. Yu, and W. Jun. “Finite element modeling of internal mechanical stress in partial SOI structure during wafer bonding processing,” in
*Int. Symp. on Physical and Failure Analysis of Integrated Circuits*, 2004. - C. M. Tan, Z. Gan, W. F. Ho, R. Liu, and S. Chen. “New useful information from simple forward I-V measurement of a power diode,” in
*4th Int. Power Electronics and Motion Control Conf*., China, 2004. - C. M. Tan, Y. F. Wong, P. H. Teoh, G. Huang. “Improving the reverse blocking capability of carrier stored trench-gate bipolar transistor,” in
*Int. Conf. on Power Electronics and Drive Systems*, 2003. - C. M. Tan and Z. Gan. “Effectiveness of delta VF test to detect solder integrity in power diode,” in
*Int. Conf. on Power Electronics and Drive Systems*, 2003, pp. 38-42. - X. F. Gao, C. M. Tan, and W. L. Goh. “Thermal stress distribution in the SOI structure,” in
*8th Int. Symp. on Integrated Circuits, Devices & Systems*, 1999, pp. 394-397.

- Dipesh Kapoor, Vivek Sangwan, Cher Ming Tan, “Investigation of Electromagnetic Interference within Dice Stack in 3D-ICs”, 第18台灣靜電放電防護技術暨可靠度技術研討會 (2019 Taiwan ESD and Reliability Conference), Hsinchu, Taiwan, 6-8th November 2019.
- Vivek Sangwan, Dipesh Kapoor, Cher Ming Tan, “Additional IC Layout Rule from the Perspective of Electromagnetic Emissions for High Frequency Integrated Circuits”, 2nd International Conference on Communication Engineering and Technology (ICCET), Nagoya, Japan, 12-15 Apr, 2019.
- Vivek Sangwan, Dipesh Kapoor, Cher Ming Tan, “Electromagnetic Emissions from GaN Power IC at Varying Distance and Frequency”, Joint IEEE EMC & APEMC Symposium, Singapore, 14-17th May 2018.
- Nirdosh, Cher Ming Tan, Malay Ranjan Tripathy, “ A Miniaturized T-Shaped MIMO Antenna for X-Band and Ku-Band Applications With Enhanced Radiation Efficiency”, in 27th Wireless and Optical Communications Conference (WOCC 2018), Hsinchu, Taiwan, 30 April – 1 May 2018.
- Cher Ming Tan*, Dipesh Kapoor and Vivek Sagawan, “Effect of ULSI Interconnect layout on its Electromagnetic Emission”, 13th IEEE
*International Conference on Solid-State and Integrated Circuit Technology (ICSICT)*, Hangzhou, China, 25-28 Oct., 2016. - Vivek Sangwan, Dipesh Kapoor, Cher Ming Tan*, “Simulation of EMI at Design Level for Integrated Circuits”, 7th Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC), Shenzhen, China, 17-21 May, 2016.

- Cher Ming Tan, Udit Narula, Jung Hua Tung, Lu An Lai, Sumit Pandey, Chung Yi Li, “Implementation of Predictive Maintenance Strategy on Hemodialysis Machines”, IEEE International Conference on System Science and Engineering 2018 (ICSSE 2018), New Taipei City, Taiwan, June 28-30, 2018.
- Jung-Hua Tung and Cher Ming Tan, “Predictive Statistical Maintenance and Repair Strategy of Dialysis Machine”,
*International Workshop on Reliability for Advanced Technology*, Taipei City, Taiwan, 16th February, 2017. - C. M. Tan, “Recent Development of Reliability and Maintenance (Invited Talk),” in
*TUV SÜD PSB Testing, Inspection and Certification Conf*., Singapore, 25th Sept.- 2nd Oct., 2012. - C. M. Tan and M. D. Le. “Contamination Assessment of Inductive Couple Plasma Etching Chamber under Mixture of Recipes using Statistical Method,” in
*IEEE Electron Devices and Solid State Circuits*, China, 2011. - Cher Ming Tan, Minh Duc Le and Nagarajan Raghavan, , 2010, “Predictive maintenance model for multi-state systems with multiple failure modes and dependent element failure under imperfect maintenance”, in
*IEEE Prognostics and Health Management Conference, USA*, p1-12 - C. M. Tan and N. Raghavan. “Imperfect predictive maintenance model for multi-state systems with multiple failure modes and element failure dependency,” in
*Prognostics & System Health Management Conf*., Macau, 2010, pp. MU3006. - C. M. Tan and N. Raghavan. “A comprehensive predictive maintenance model for equipment maintenance in the semiconductor industry,” in
*Advanced Process control for semiconductor Manufacturing*, 2006. - C. M. Tan and N. Raghavan. “A cost model for the predictive maintenance policy of a multi-state system,” in
*10th Maintenance and Reliability Conf*., 2006. - N. Raghavan and C. M. Tan. “Examine the impact of maintenance policy for predictive maintenance,” in
*Int. Conf. on Quality and Reliability*, 2005, pp. 745-752. - C. M. Tan. “Maintenance policy for predictive maintenance (invited),” presented at 6th Annual Plant Reliability and Maintenance,
*Kuala Lumpur,*Dec. 2005. - C. M. Tan. “Predictive maintenance and its impact to business decision (invited),” presented at Strategic Maintenance Congress, Dec. 2005.
- C. M. Tan, B. K. Khoo, and J, Png. “Determining maintenance strategy from root cause analysis and reliability data analysis (invited),” presented at Annual Reliability, Availability, Maintainability and Safety Conf.,
*Kuala Lumpur*, Jun. 2004. - C. M. Tan, B. K. Khoo. “Application of FMEA for build-in reliability and maintenance (invited),” presented at Industrial Talk, 2004.

- C. M. Tan, W. B. Yu, and J. Wei. “Making wafer bonding viable for mass production,” in
*Materials Research Society Spring Meeting*, 2005. - J. Wei, S.S. Deng, C.M. Tan,
**“**Sol-gel coating facilitating Si-to-Si wafer bonding at low temperature**,”**in*American Society of Mechanical Engineers, Electronic and Photonic Packaging, EPP*, v 5, p 225-229, 2005,*Electronic and Photonic Packaging, Integration and Packaging of Micro/Nano/Electronic Systems – 2005* - G. Huang, C.M. Tan, Z. Gan, W. Jun, G. Zhang, W. Yu,
**“**Finite element modeling of residual mechanical stress in partial SOI structure due to wafer bonding processing,” in*Proceedings of the 11th International Symposium on the Physical and Failure Analysis of Integrated Circuits. IPFA 2004 (IEEE Cat. No.04TH8743)*, p 189-92, 2004 - J. Wei, S. S. Deng, C. M. Tan, and C. K. Wong. “Low temperature Si-to-Si wafer bonding with Sol-Gel coating as intermediate layer,” in
*IEEE Electronics Packaging Technology Conf*., Singapore, 2004. - S. S. Deng, J. Wei, C. M. Tan, W. B. Yu, S. M. L. Nai, and H. Xie. “Low temperature wafer bonding process using sol-gel intermediate layer,”
*in Int. Mechanical Engineering Congress and Exposition*, 2004. - W. B. Yu, J. Wei, C. M. Tan, and S. S. Deng. “Low temperature wafer bonding in medium vacuum,” in
*Int. Mechanical Engineering Congress and Exposition*, 2004. - S. S. Deng, J. Wei, C. M. Tan, and W. B. Yu. “Silicon-to-silicon wafer bonding by tempered sol-gel intermediate layer,” in
*Thin Film and Nanotech*, 2004. - S. S. Deng, C. M. Tan, J. Wei, S. M. L. Nai, and W. B. Yu. “Silicon-to-silicon wafer bonding efficiency by sol-gel process,” in
*5th Electronics Packaging Technology Conf*., 2003. - W. Yu, C. M. Tan, J. Wei, S. Deng, and S. M. L. Nai. “Influence of plasma treatment and cleaning on vacuum wafer bonding,” in
*5th Electronics Packaging Technology Conf*., 2003. - S. S. Deng, J. Wei, C. M. Tan, S. M. L. Nai, H. Xie, and W. B. Yu. “Low temperature silicon wafer bonding by sol-gel processing,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003. - W. Yu, C. M. Tan, and G. Zhang. “Influence of super-thin oxide layer on device fabricated on partial SOI substrate,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003. - W. Yu, J. Wei, C. M. Tan, S. Deng, and S. M. L. Nai. “Influence of applied load on wafer bonding in vacuum,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003.

- C. M. Tan, W. B. Yu, and J. Wei. “Making wafer bonding viable for mass production,” in

- C. M. Tan and F. He. “3D electromigration modeling at circuit level (Invited Talk),” in Taiwan ESD and Reliability Conf., Hsinchu, Taiwan, 5-7th Nov 2012.
- C. M. Tan. “Physics of electromigration in today ULSI interconnections (Tutorial),” in Taiwan ESD and Reliability Conf., Hsinchu, Taiwan, 5-7th Nov. 2012.
- S. Lan, C. M. Tan, and K. Wu. “Reliability study of LED driver – a case study of black box testing,” in 23rd European Symp. on Reliability of Electron Devices, Failure Physics and Analysis, Cagliari, Italy, 1st-5th Oct. 2012.
- F. He and C. M. Tan. “Effect of IC layout on the reliability of CMOS amplifiers,” presented at Int. Conf. on Materials for Advanced Technologies, Singapore, Jul. 2011.
- C. M. Tan and F. He. “3D circuit model for 3D IC reliability study (invited),” in EuroSIME, 2009.
- C. M. Tan and F. He. “Predicting Integrated Circuit Reliability from Wafer Fabrication Technology Reliability Data,” in Int. Symp. on Integrated Circuits, Singapore, 2007.

- Vivek Sangwan, Dipesh Kapoor, Cher Ming Tan,” Failure Mechanisms of GaN Transistors in High Power Integrated Circuits”, 第18台灣靜電放電防護技術暨可靠度技術研討會 (2019 Taiwan ESD and Reliability Conference), Hsinchu, Taiwan, 6-8th November 2019.
- Udit Narula & Cher Ming Tan, “EOS Failure Analysis and Root Cause Identification of Schottky Barrier Rectifiers through Finite Element Modelling”,
*Taiwan ESD and Reliability Conference*, Hsinchu, Taiwan, 1st-3rd November 2017. - C. M. Tan, S. Yanuar, and T. C. Chai. “Finite element modeling of capacitive coupling voltage contrast,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2007. - C. M. Tan, Y. X. Tay, C. W. Goh, and T. C. Chai. “Mapping of solder mask covered interconnects on high density printed circuit board,” in
*Electronic Packaging and Technology Conf*., 2006. - C. M. Tan, T. C. Chai, J. Lim, and K. P. Lim. “Non-destructive identification of open circuit in wiring on organic substrate with high wiring density covered with solder resist,” in
*European Symp. on Reliability of Electron Devices, Failure physics and Analysis*, 2005. - K. P. Lim, J. Lim, C. M. Tan, and T. C. Chai. “Feasibility of capacitive coupling voltage contrast (CCVC) for the failure analysis of advanced printed circuit board,” in
*Symp. of Microelectronics*, 2005. - C. M. Tan, Z. Gan, K. Prasad, and D. H. Zhang. “A novel technique to re-construct three dimensional void in passivated metal interconnects,” in
*Materials Research Society Spring Meeting*, 2003. - Z. Gan, C. M. Tan, K. Prasad, D. H. Zhang, and G. Zhang. “Novel rapid nondestructive technique for locating tiny voids in metallization line,” in
*Int. Microscopy and Microanalysis Conf*., 2002.

- N. Raghavan and C. M. Tan. “Statistical modeling of via redundancy effects on interconnect reliability,” in
*IEEE Int. Conf. on Physical and Failure Analysis*, 2008. - C. M. Tan and N. Raghavan. “An approach to statistical analysis of gate oxide breakdown mechanisms,” in
*European Symp. on Reliability of Electron Devices, Failure physics and analysis*, 2007. - N. Raghavan and C. M. Tan. “Statistical analysis of multi-censored electromigration data using the EM algorithm,” in
*Int. Symp. on physical and failure analysis of integrated circuits*, 2007. - C. M. Tan, V. A. Anand, G. Zhang, A. Krishnamoorthy, and S. Mhaisalkar. “New analysis technique for time to failure data in copper electromigration,” in
*JEDEX Conf*., 2005. - C. M. Tan. “Reliabiilty Analysis and Application with MATLAB (invited),” presented at Industrial seminar, May 2004.
- Cher Ming Tan, “Reliability Data Analysis”,
**(Keynote)**IEEE Invited talk organized by Rel/CPMT/ED chapter, 2002. - C. M. Tan and K. N. C. Yeo. “Reliability statistics perspective on standard wafer level electromigration accelerated test (SWEAT),” in
*IEEE Canadian Conf. on Electrical and Computing Engineering*, 2000, pp. 167-172. - G. Zhang and C. M. Tan. “Selection of failure time within test time interval for group reliability data analysis,” in
*IEEE Canadian Conf. on Electrical and Computing Engineering*, 2000, pp. 98-102. - G. Zhang and C. M. Tan. “Reliability data analysis software development,” in
*IEEE Canadian Conf. on Electrical and Computing Engineering*, 2000, pp. 107-115.

- Preetpal Singh, Cher Ming Tan and Hao-Chung Kuo. “Photo- modification and photo- oxidation effect on CdSe Quantum dot down converted LED’s lifetime.” 7th IEEE International Symposium on Next-Generation Electronics (ISNE 2018), National Taipei University of Technology, Taipei, Taiwan. May 7th to 9th, 2018.
- Preetpal Singh and Cher Ming Tan, “Photo- modification and photo- oxidation effect on CdSe Quantum dot down converted LED’s lifetime “,
*8th IEEE International Nanoelectronics Conference*, Kuala Lumpur, Malaysia, 3-5th January 2018 - Preetpal Singh and Cher Ming Tan, “Thermal-humidity degradation mechanisms of silicone in LED Packaging under different environmental conditions”,
*International Workshop on Reliability for Advanced Technology*, Taipei City, Taiwan, 16th February, 2017. - Preetpal Singh, Cher Ming Tan, “Investigation of LED lumen recovery after the sharp initial lumen degradation using ANSYS finite element modeling and C-SAM”,
*2016 Taiwan ESD and Reliability Conference*, Hsinchu, Taiwan, Oct. 31-Nov. 2, 2016. - Preetpal Singh, Chao Sung Lai, Cher Ming Tan, “Graphene as a buffer layer for high quality GaN deposition on substrates in electronics”,
*The 5**th**International Symposium on Next-Generation Electronics*, Hsinchu, Taiwan, 3-6 May, 2016. - Preetpal Singh, Cher Ming Tan, “Dependence of test conditions on humidity reliability results for high power LEDs”,
*8**th**International Conference on Materials for Advanced Technologies*, Singapore, 28 June, 2015. - Cher Ming Tan and Preetpal Singh, “Exploring the Humidity Effect on the Reliability of High Power LEDs”, (Invited talk)
*International Electron Devices and Materials Symposium*, Hualian, Taiwan, 20-21 November, 2014. - Lan Song and Cher Ming Tan, “Reliability Evaluation and Improvement for High Power LED Driver”,
*International Conference on Materials for advanced Technologies*, Singapore, 30 June, 2013. - C. M. Tan. “Study of humidity reliability of solid state lighting (Invited Talk),” in
*LED Display and Lighting System Symp*., Shenzhen, China, 18-19th Jul. 2012. - S. H. Chen, C. M. Tan, and G. H. Tan. “Degradation behaviour of high power light emitting diode under high frequency switching,” in
*23rd European Symp. on Reliability of Electron Devices, Failure Physics and Analysis*, Cagliari, Italy, 1st-5th Oct. 2012. - S. H. Chen, C. M. Tan, and E. Chen. “Ensuring Accuracy in Optical and Electrical Measurement of Ultra-Bright LEDs during Reliability Test,” presented at
*Int. Conf. on Materials for Advanced Technologies*, Singapore, Jan. 2011. - C. M. Tan, B. K. Chen, and M. Xiong. “Study of humidity reliability of high power LEDS (invited),” in
*IEEE Int. Conf. on Solid-State and Integrated Circuit Technology*, Shanghai, 2010, pp. 1592-1595. - C. M. Tan, B. K. Chen, R. Tew. “Humidity effect on the degradation of packaged ultra-bright white LEDs,” in
*IEEE Electronics Packaging Technology Conf*., 2008. - S.L.H. Lim, P.L.T. Duong, P. Singh, C.M. Tan, and N. Raghavan “Assessing Multi-Output Gaussian Process Regression for Modeling of Non-Monotonic Degradation Curves of Light Emitting Diodes in Storage,” in
*ESREF 2020*

- C. M. Tan and K. T. Lau. “Automated wafer defect map generation for process yield improvement,” in
*Int. Symp. on Integrated Circuits*, Singapore, 2011. - C. M. Tan. “Identifying key parameters for risk based inspections (RBI) and failure mode effect analysis (FMEA) (invited),” presented at Int. Quality and Process control Conf., Bangkok, Jan. 2004.
- T. K. Neo and C. M. Tan. “QFD implementation in a discrete semiconductor industry,” in
*IEEE Annual Reliability and Maintainability Symp*., 2002, pp. 484-489. - C. M. Tan and G. Zhang. “A new quality control parameter in wafer fabrication for wire bonding integrity,” in
*SPIE on Microelectronic Yield, Reliability and Advanced Packaging*, 2000. - T. K. Neo and C. M. Tan. “Integrating device modeling in QFD implementation for power electronics applications,” in
*IEEE Canadian Conf. on Electrical and Computing Engineering*, 2000, pp. 1187-1191. - C. M. Tan. “Computerization of quality control in electronics components industry,” in
*National Quality Management Conf*., 1995.

- F. He and C. M. Tan, “Monte Carlo simulation of fatigue crack initiation at elevated temperature,” in
*13th Int. Conf. on Fracture*, Beijing, China, 16th-21st Jun. 2013.

- M. K. Loganathan, C. M. Tan, B. Mishra, T. A. M. Msagati, and L. W. Snyman “Review and selection of advanced battery technologies for post 2020 era electric vehicles”, IEEE-SAE International Transportation Electrification Conference (ITEC 2019), Bangalore, India, 17-19th Dec, 2019.
- M. K. Loganathan, B. Mishra, and C. M. Tan, “Multi-Criteria Decision Making (MCDM) for the selection of Li-Ion batteries used in Electric Vehicles (EVs)”, In Proc.: International Conference on Advances in Minerals, Metals, Materials, Manufacturing and Modelling (ICAM-2019), Warangal, India, 25-27th Sep, 2019.
- Cher Ming Tan, Leng Feng, “Internal probing into the degradation processes in Lithium-ion batteries under cyclic aging”, Invited talk,
*1**st**International battery Safety Workshop*, Munich, Germany, 25-26 August, 2015. - Cher Ming Tan, Leng Feng, “Li Ion Battery Pack Reliability Assurance”,
*4**th**international symposium on energy challenges and mechanics – working on small scale*, Scotland, UK, 11-13 August, 2015. - Feng Leng and Cher Ming Tan, “A methodology for studying the effect of overcharge on the safety of lithium-ion batteries”, Invited talk,
*5**th**Annual Battery Safety Conference*, Washington, USA, 13-14 Nov. 2014. - Feng Leng, Cher Ming Tan, Raghavendra Arunachala, Andreas Jossen, “Real Time Monitoring and Characterizing of Li-ion Batteries Aging”,
*Advanced Energy Technology Congress*, San Diego, USA, 11-14 Nov. 2013. - C. M. Tan, M. D. Le, and F. Leng. “SoC and SoH Estimation of battery cell and modules for electric vehicles (Keynote Talk),” in
*IEEE Annual PHM Conf*., Beijing, China, 22nd-24th May 2012. - C. M. Tan, M. D. Le, and F. Leng. “Estimation of SoC/SoH of cell and RUL of battery pack for EV Application (Invited Talk),” in
*IEEE Battery Management Systems for High Operational Availability and Safety Conf*., Shenzhen, China, 21st May 2012. (Only transferred from prognosis section to here)

- Yueh Chiang, Cher Ming Tan, Tsi-Chian Chao, Chung-Chi Lee, and Chuan-Jong Tung, “Evaluate The Equivalence On Let Spectra Between Neutron And Proton For Radiation Realibility Testing”, Mini- Micro- Nano- Dosimetry (MMND 2020), New York, USA, Feb 2020.
- Yueh Chiang, Cher Ming Tan, Tsi-Chian Chao, Chung-Chi Lee, and Chuan-Jong Tung, “Evaluating the lineal energy and secondary particle yields in a FinFET structure” Geant4 School & Monte Carlo Workshop for Radiotherapy, Imaging and Radiation Protection, New York, USA, Dec 2019.

- M. K. Loganathan, Sunil Rai, S. S. Neog, & C. M. Tan, “Process safety and performance improvement in oil refineries through active redundancy and risk assessment method- A case study”, International Conference on Industrial Engineering and Engineering Management (IEEM), Bangkok, Thailand, 16-19 Dec 2018.
- Cher Ming Tan, Udit Narula, Dipesh Kapoor, “Reliability Paradox for Worldwide Automotive Electronics”,
*63rd Annual Reliability & Maintainability Symposium (RAMS)*, Orlando, FL, USA, 23-26 January 2017.

- P. Ranjan, H. Pandey, M. R. Tripathy, C. M. Tan, and S. Pushp “Reliability Ranking of Nodes: A Case of Revolution.” Progress in Electromagnetics Research Symposium (PIERS), Toyama, Japan, pp. 1542-1549. Aug, 2018.
- J. H. Tung, C. S. Chen, W. Y. Zhao and C. M. Tan, “Optimization of sandblasting process of complex 3D surface polishing using variable viscoelastic diamond particles abrasive”, 3rd International Conference on Automation, Mechanical Control and Computational Engineering (AMCCE), Dalian, China, May 2018.
- J. Zhang, X. Y. Zhang, Z. L. Chen, K. Y. See, C. M. Tan, and S. S. Chen. “On-chip RF energy harvesting circuit for image sensor,” in
*Int. Symp. on Integrated Circuits*, 2011, pp. 420-423. - J. W. Zhang, L. B. Wang, K. Y. See, C. M. Tan, C. C. Boon, K. S. Yeo, and M. A. Do. “Wireless energy harvesting using serially connected voltage doublers,” in
*Asia-Pacific Microwave Conf*., Yokohama, Japan, 2010. - C. M. Tan, K. Y. See, J. W. Zhang, M. J. Xu, C. C. Boon, K. S. Yeo, and M. A. Do. “A possible reality on battery-less low-power portable electronics,”
*in IEEE Conf. on Industrial Electronics and Applications*, Taichung, Taiwan, 2010, pp. 630-633. - Z.J. Han, M. Shakerzadeh, B.K. Tay, C.M. Tan,
**“**Protein immobilization on nanostructured surfaces with different wettability,”*2010 IEEE 3rd International Nanoelectronics Conference (INEC 2010)*, p 1 pp., 2010 - Y. Hou and C.M. Tan. “Transient electrical thermal analysis of ESD process using 3-D finite element method,” in
*12th**IEEE Int. Symp. on Integrated Circuits*, Singapore, 2009. - C. M. Tan, E. Q. Kuan, and R. Cai. “The influence of Nano TiO2 film thickness on its photo-catalytic and hydrophilic properties,” presented at Advanced Materials for Nanotechnology, New Zealand, May 2009.
- C. M. Tan. “Extending the useful life of solar cell through Nano TiO2 film coating,” presented at Advanced Materials for Nanotechnology, New Zealand, May 2009.
- C. M. Tan, L. Sun, and C. Wang. “Going green for discrete power diode manufacturing,” presented at IEEE ICIEA2009, Xi’an, China.
- I. V. McLoughlin, A. M. Prakash, S. Shukla, S. H. Tan, K. Arichandran, C. M. Tan, V. S. Sawant, and R. K. Manchanda. “Use of high altitude balloon platforms for small satellite testing,” in
*IEEE Int. Workshop on Digital infoTainment and Visualization*, 2008, pp. 1-5. - C. M. Tan, L. Sun, N. Raghavan, G. Huang, C. Hsu, and C. Wang. “The physical limit and manufacturability of power diode with carrier lifetime control,” in
*Int. Conf. on industrial electronics and applications*, 2007. - N. Raghavan, N. Hwang, and C. M. Tan. “A comprehensive semi-empirical mobility model for strained-Si N-MOSFETs,” in
*8th Int. Conf. on Solid-State and Integrated Circuit Technology*, 2006, pp. 139-142. - C. M. Tan and Z. Gan. “Building empirical model through simulation a case study,” in
*Int. Conf. on Engineering Management*, 2004, pp. 1090-1094. - C. M. Tan, Y. H. Sng, and H. K. Tang “Industry-university R&D collaboration: expectation and reality,” in
*Int. Conf. on Engineering Management*, 2004, pp. 626-629. - Z. L. Yuan, D. H. Zhang, C. Y. Li, K. Prasad, L. J. Tang, C. M. Tan, R. Kumar, and P.D. Foo. “Study of interaction between a-Ta films and SiO2 under rapid thermal annealing,” in
*Int. Conf. on Materials for Advanced Technologies*, 2003. - K. Prasad, X. L. Yuan, C. M. Tan, D. H. Zhang, C. Y. Li, S. R. Wang, S. Y. J. Yuan, J. L. Xie, D. Gui, and P. D. Foo. “Diffusion studies of Cu in Si and low-k dielectric materials,” in
*Materials Research Society Spring Meeting*, 2002. - S. Zukotynski, F. Gaspari, N. Kherani, T. Kosteski, K. Law, W. T. Shmayda, and C. M. Tan. “Metastability in tritiated amorphous silicon,” in
*19th Int. Conf. on Amorphous and Microcrystalline Semiconductors Science & Technology*, 2001. - K. Prasad, D. H. Zhang, C. M. Tan. “Backside copper contamination issues in CMOS integrated circuits,” in
*Int. workshop on physics of semiconductor devices*, 2001. - S. W. Loh, D. H. Zhang, C. Y. Li, R. Liu, A. T. S. Wee, K. Prasad, C. M. Tan, Y. K. Lee, P. D. Foo, and J. Xie. “Effects of a thin flash layer on the diffusion of Cu, Ta, Si, and O in the Cu/TaN/SiO2/Si structures,” in
*Int. Semiconductor Technology Conf*., 2001, pp. 116-122.